Ceralun (A+B) Green (20g pack)

£4.24
In stock
Only 2 left
SKU
AP01004010
  • Buy 3 for £4.02 each and save 5%
  • Buy 10 for £3.60 each and save 15%
Ceralun is a versatile and strong two-component, high-performance ceramic epoxy composite, which has been especially developed for the application of crystals. It has optimal adhesive characteristics for applications on metal, glass, crystal, glue-able plastic surfaces, rubber, wood, cork, and porcelain. In addition, the mirrored surface of the crystal is protected against mechanical stress by the gentle build-up of adhesion, the optimized load transmission, and the maximum elasticity.

KEY FEATURES:
• Specifically developed and tailored to embed foiled and unfoiled crystals.
• High level of hardness, rigidity and shock absorbance.
• Resistant to perspiration, humidity or climatic changes and shows no aging.
• Allows new design possibilities.
• Perfect material to generate a large variety of surfaces and structures.
• Applicable on 3D-shaped surfaces.
• Alternative solution to gluing.

HELPFUL HINTS:
• Do not deviate from the recommended mixing ratio of the components (resin/hardener), 1:1.
• Take care to mix the two components thoroughly until a homogenous appearance is achieved.
• Reduce the processing time of a maximum of two hours as a temperature of 23°C.
• Take care to gently remove any condensed water that occurs during the defrosting process.
• Make sure not to exceed the recommended time of 24 hours when Ceralunâ„¢ is stored in a freezer at a temperature of around -20°C (or -4°F).
• Storing Ceralun in a freezer, it makes it easier for you to remove it from the mold.
More Information
Country of ManufactureGermany
TypeCeralun
ColorGreen
Size20g
Quantity in Pack20g